14.Slide sixteen Weights (30) onto the Weight Guides (9). Make sure the slots for the Weight
Pin (not shown) are on the indicated side and on the bottom of the Weights.
Press a Weight Tube Bumper (35) into a Weight Tube (34). Insert the Weight Tube into the stack of Weights (30) as shown.
Lubricate the indicated holes in a Top Weight (31) with grease. Slide the Top Weight onto the Weight Guides (9). Make sure that the groove on the
Top Weight for the Weight Tube (34) pin is on the bottom of the Top Weight.
15.Press four 40mm x 60mm Inner Caps (42) into the Right Top Frame (10). Press two 25mm Round Outer Caps (47) onto the Right Top Frame.
14 |
| |
9 |
| |
31 |
| |
| Lubricate | |
Pin | Pin | |
Groove | ||
| ||
34 |
| |
35 | 30 | |
| ||
Slot |
| |
15 |
| |
42 | 42 | |
| ||
| 10 | |
42 |
| |
42 |
| |
| 47 |
11
