9.Slide two Weight Bumpers (50) onto two Weight Guides (9) as shown.
Attach the Weight Guides (9) to the Left Base (2) with two M10 x 78mm Bolts (85), four M10 Washers (74), four 17mm Spacers (58), and two M10 Nylon Locknuts (75).
10.Slide sixteen Weights (30) onto the Weight Guides (9). Make sure the slots for the Weight
Pin (not shown) are on the indicated side and on the bottom of the Weights.
Press a Weight Tube Bumper (35) into a Weight Tube (34). Insert the Weight Tube into the stack of Weights (30) as shown.
Lubricate the indicated holes in a Top Weight (31) with grease. Slide the Top Weight onto the Weight Guides (9). Make sure that the groove on the
Top Weight for the Weight Tube (34) pin is on the bottom of the Top Weight.
9
9 |
|
|
|
| 9 |
|
|
| 50 |
|
|
|
| 50 |
|
|
| 74 | 85 |
|
|
| |
| 2 |
|
|
|
| 58 |
|
75 | 58 |
|
|
74 |
|
| |
|
|
| |
10 |
|
|
|
|
| 9 |
|
|
| 31 |
|
| Lubricate |
|
|
| Pin | Pin |
|
|
|
| |
| Groove |
|
|
|
| 34 |
|
|
| 35 |
|
|
| 30 |
|
| Slot |
|
|
