16.Attach the Right Top Frame (10) to the Weight Guides (9) with two M10 x 78mm Bolts (85), four M10 Washers (74), four 17mm Spacers (58), and two M10 Nylon Locknuts (75). Do not tighten the
Locknuts yet.
Attach the Right Top Frame (10) to the Right Upright (5) with two M10 x 60mm Bolts (82), a Support Plate (29), and two M10 Nylon Locknuts (75). Do not tighten the Locknuts yet.
17.Attach the Right Top Frame (10) to the Left Top Frame (11) with two M10 x 80mm Bolts (86), two M10 Washers (74), and two M10 Nylon Locknuts (75).
Tighten the M10 Nylon Locknuts (75) used in steps 3–17.
Arm Assembly
18.Open the part bag labeled “ARM ASSEMBLY.”
Press a 50mm x 75mm Inner Cap (45) into the Leg Press Arm (12).
Lubricate an M12 x 102mm Bolt (81) with grease. Attach the Leg Press Arm (12) to the Right Base
(1)with the Bolt and an M12 Nylon Locknut (95).
Do not overtighten the Locknut; the Leg Press Arm must be able to pivot easily.
19.Lubricate an M12 x 104mm Bolt (67) with grease. Attach the Leg Press Plate (13) to the Leg Press Arm (12) with the Bolt and an M12 Nylon Locknut
(95).Make sure the bar is closer to the ground. Do not overtighten the Locknut; the Leg Press Plate must be able to pivot easily.
16 | 85 | 74 |
|
|
| ||
|
| 58 | 58 |
| 74 |
| 74 |
|
| 75 | |
| 82 | 58 | |
|
| ||
29 |
|
| |
|
| 10 | 74 |
|
| 58 | |
|
| 9 | 75 |
|
| 5 |
|
|
| 75 |
|
| 75 |
|
|
17 |
| 74 | 86 |
|
| ||
|
| 75 |
|
|
| 10 | 74 |
|
|
| |
|
|
| 11 |
18 | 45 |
| |
|
| ||
|
| 12 |
|
|
| 95 |
|
|
| 1 | 81 |
|
| Lubricate | |
19 |
|
|
|
|
|
| 13 |
|
|
| 95 |
|
|
| Bar |
|
|
| 12 |
| 67 | Lubricate |
|
12
