11. Identify the Left Accessory Tray (112) and the | 11 | 2 |
| 2 |
Right Accessory Tray (116). Attach the Left |
| |||
Accessory Tray and the Right Accessory Tray |
|
|
|
|
to the console assembly with eight #8 x 1/2" |
|
| 112 | 116 |
Screws (2). |
|
| ||
|
|
| Console | |
|
|
| Assembly | |
12. Have a second person hold the console assem- | 12 |
|
| Console |
bly near the Uprights (85, 86). |
|
|
| Assembly |
Connect the Upright Wire (97) to the console |
|
|
|
|
wire extending from the console assembly. See |
|
|
|
|
the inset drawing. The connectors should |
|
|
|
|
slide together easily and snap into place. If |
|
|
|
|
they do not, turn one connector and try again. IF |
|
|
|
|
THE CONNECTORS ARE NOT CONNECTED |
|
|
|
|
PROPERLY, THE CONSOLE MAY BE DAM- |
|
|
|
|
AGED WHEN THE POWER IS TURNED ON. |
| 85 | Console | |
Remove the wire tie from the Upright Wire (97). |
| |||
Insert the excess wire into the Right Upright (86) |
|
|
| Wire |
as you set the console assembly on the |
| Console |
| 97 |
Uprights. Be careful not to pinch any wires. |
| Wire | ||
|
| Wire | 86 | |
|
| 97 | Tie |
|
|
|
|
| |
13.Attach the console assembly to the Uprights (85, 86) with four 3/8" x 1 1/4" Bolts (7) and four 3/8" Star Washers (10). Start all four Bolts be- fore tightening any of them.
See steps 4 and 6. Fully tighten the four 3/8" x 4 1/2" Bolts (6).
13 Console Assembly 
107 | 10 | 7 | 10 |
| 85 | 10 | 7 86 |
|
| ||
|
| 7 |
|
10
