Gold's Gym GGTL78609.0 manual HOW to USE AN Ifit Workout, Insert an iFit card and select a workout

HOW TO USE AN IFIT WORKOUT

iFit cards are available separately. To purchase iFit cards at any time, go to www.iFit.com or call the tele- phone number on the front cover of this manual. iFit cards are also available at select stores.

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

2.Insert an iFit card and select a workout.

To use an iFit workout, insert an iFit card into the iFit slot; make sure that the iFit card is oriented so the metal contacts are face-down and are inserted into the iFit slot. When the iFit card is properly in- serted, the iFit logo will light.

iFit Card

iFit Slot

Next, select an iFit workout by pressing the iFit in- crease and decrease buttons next to the iFit slot. When an iFit workout is selected, the displays will show the maximum incline setting, the duration, and the maximum speed setting of the workout. In addition, a profile of the speed settings of the work- out will scroll across the matrix.

Each iFit workout is divided into several one- minute segments. One speed setting and one in- cline setting are programmed for each segment. Note: The same speed and/or incline setting may be programmed for consecutive segments.

3.Start the workout.

Press the Start button or one of the Speed increase buttons to start the workout. A moment after you press the button, the treadmill will automatically ad- just to the first speed and incline settings of the workout. Hold the handrails and begin walking. During the workout, a personal trainer will guide you through the workout.

If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- ride the setting by pressing the speed or incline but- tons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or one of the Speed increase buttons. The walking belt will begin to move. When the next seg- ment of the workout begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment.

4.Follow your progress with the displays. See step 5 on page 16.

5.Turn on the fans if desired. See step 7 on page 16.

6.When you are finished exercising, remove the key from the console.

See step 8 on page 16.

CAUTION: Always remove iFit cards from the iFit slot when you are not using them.

20