14.Attach the Right Bottom Handrail Cover (108) and the Left Bottom Handrail Cover (104) to the console assembly with four #8 x 3/4" Screws
(1).
15.Raise the Frame (57) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (54) so that the large barrel and the Latch Knob (55) are in the posi- tions shown.
Attach the Latch Bracket (36) and the Storage Latch (54) to the Base (95) with two 3/8" x 2" Bolts (5) and two 3/8" Nuts (9).
Attach the upper end of the Storage Latch (54) to the bracket on the Frame (57) with a 3/8" x 2" Bolt (5) and a 3/8" Nut (9). Note: It may be nec- essary to move the Frame back and forth to align the Storage Latch with the bracket.
Lower the Frame (57) (see HOW TO LOWER THE TREADMILL FOR USE on page 24).
14 |
| |
104 | Console | |
1 | Assembly | |
108 | ||
| ||
| 1 | |
15 | 57 | |
| ||
9 | 5 |
55 | 54 |
Large | |
| Barrel |
95 | 36 |
9 
5
16.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27).
11
