22 DVD Recorder+VCR User’s Guide
General Settings

Tuning Band

Specifies whether the DVD Recorder+VCR
is connected to an antenna or cable TV
source.
1 Press SETUP.
2 Select “GENERAL” > “Tuning Band” .
3 Choose from the following:
TV - Select if the DVD Recorder+VCR
is connected to an antenna.
CATV - Select if the DVD
Recorder+VCR is connected to a cable
TV source.

Auto Channel Search

Automatically searches for all available
TV stations from antenna or cable TV.
1 Press SETUP.
2 Select “GENERAL” > “Auto Channel
Set” > “Start” .
• The DVD Recorder+VCR searches
for all available stations. This may
take several minutes to complete.
NOTE:
• If you receive channels from a cable
box or satellite receiver, there is no
need to set the Tuning Band or search
for channels.

Adding/Deleting Channels

Allows you to manually add or delete
channels.
1 Press SETUP.
2 Select “GENERAL” > “CH. Add/Del”
>”Edit”.
3 Add or delete channels:
• Use CH or 0-9 to select the
desired channel, then press .
• Press ENTER to add or delete the
selected channel.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Power Save Mode
TV
CATV
Prev. Select Close
Factory Set
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
11%
Stop
Prev. Select Close
Power Save Mode
Factory Set
Ch. 2 Delete
Add
0-9 Input Close