GoVideo VR3845 General Setting s

24 DVD Recorder+VCR User’s Guide
General Settings (continued)
Progressive Scan
Activates the Progressive Scan output to
your TV.
1 Press SETUP.
2 Select “GENERAL” > “Progressive Scan” .
3 Turn Progressive Scan on or off.
• Only activate Progressive Scan if
your TV is capable of receiving a
Progressive Scan signal.
NOTE:
• If your enable Progressive Scan
accidentally, the picture will be
distorted. To reset the unit, first
remove any disc or tape in the unit,
then press and hold the STOP
button for 5 seconds.
Power Save Mode
Sets the DVD Recorder+VCR to an
economical power saving mode.
1 Press SETUP.
2 Select “GENERAL” > “Power Save
Mode” .
3 Turn Power Save Mode on or
off.
Factory Settings
Restores the DVD Recorder+VCR to its
original factory settings.
1 Press SETUP.
2 Select “GENERAL” > “Factory Set” >
“SET” .
3 Select “OK” and press ENTER.
• All menu settings will be restored to
their factory defaults.
• Some settings cannot be reset, in-
cluding the Parental Control, Pass-
word, and Area Code settings.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
ON
OFF
Prev. Select Close
Power Save Mode
Factory Set
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
ON
OFF
Prev. Select Close
Power Save Mode
Factory Set
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
SET
Prev. Select Close
Power Save Mode
Factory Set
Cancel
It initializes the system status.
Proceed?
OK