Grace GDI-IRA500 manual Scan for a wireless network connection

Models: GDI-IRA500

1 51
Download 51 pages 39.1 Kb
Page 14
Image 14

14

Initializing

Network

After a few seconds, the screen will change to show:

Scan for networks

Enter network

View Config

Edit Config

Step 2 - Scan for a wireless network connection

When the display shows brackets next to the words <Scan for networks>, press the ‘Select’ dial. (NOTE: IF you make an error at any point, press the ‘Back’ button to return the previous screen)

The SOLO will now scan for all available wireless networks and will display:

Scanning

IIIIIIIIIIIIIIIIIII

IF the radio does not find a wireless network router, the display will show:

No networks

Found

If this happens after subsequent attempts you should check the status of your Wi-Fi router - see the instructions supplied with your wireless router / modem or contact the person who set up your home computer network.

When the SOLO finds your wireless network, the display will show the SSID (the name of your home wireless network) - this is the name ascribed to your Wi-Fi router by the person who set up your network - for example:

< My Home Network >

Page 14
Image 14
Grace GDI-IRA500 manual Scan for a wireless network connection