15

It is possible, and in some locations likely, that your radio will find more than one wireless network, in which case you can choose the wireless (Wi-Fi) network you want to connect to. Turn the dial on your radio until the name of the wireless network has brackets {} next to the name of the network you want to connect to.

For optimal performance you may want to check your home network settings to make sure your radio is on a deferent channel than your neighbors. To do this please consult your Wi-Fi router owner’s manual.

Step 3 - Connect to the wireless network

When the SSID for the Wi-Fi router you want to connect to is displayed on the screen, press the large dial inward.

IF your network is not configured to require an encryption code, the screen should display:

Connecting to

Network

then:

Network OK

IF the screen displays either WEP or WPA, a password is required:

Enter WEP key

OR

Enter WPA key

Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA or WPA2). You therefore need to enter the correct WEP or WPA password on

Page 15
Image 15
Grace GDI-IRA500 manual Connect to the wireless network, Connecting to Network, Network OK, Enter WEP key Enter WPA key