Connect Heated Hoses
1.Lay heated hoses end to end, matching the color coding. Red for component A (ISO), blue for compo- nent B (RES).
Installation
4. Connect air hoses (C).
Single Heat Zone with A and B Heated Hose
D
C
B
TI14733a
Dual Heat Zone with A and B Heated Hose
A
FIG. 3
TI14731a
D
C
D
TI15097a
Single Heat Zone with A or B Heated Hose
2.Connect fluid hoses (A, B).
3.Connect signal cables (13).
B
A
13 TI14732a
FIG. 4
NOTE: Do not connect the main air supply to the air hose at this time.
D
C
D TI15140a
FIG. 5
5.Connect electrical wires (D).
a.Ensure electrical wires ends are 5/8 in. (0.625mm) long. If they are not, use a sharp scissors to strip all four wire ends to the correct length. See Strip Length Gauge for correct length.
Strip Length
|
|
|
This illustration is not to scale. |
| 5/8 in. |
| (0.625 mm) | |
|
|
TI9733a
FIG. 6
3A0237L | 17 |
