Basic Troubleshooting
Basic Troubleshooting
Check everything in this Basic Troubleshooting table before you bring the sprayer to a Graco/MAGNUM authorized ser- vice center.
Problem | Cause | Solution | |
|
|
| |
|
|
| |
Power switch is on and sprayer is | Pressure is set at zero pressure. | Turn pressure control knob clock- | |
plugged in, but motor does not run, |
| wise to increase pressure setting. | |
and pump does not cycle. |
|
| |
Electric outlet is not providing power. | • Check that lighted plug on | ||
| |||
|
| sprayer is lit (this indicates | |
|
| electric power at outlet). | |
|
| • Reset building circuit breaker or | |
|
| replace fuse. | |
|
|
| |
| Extension cord is damaged. | Replace extension cord. Read | |
|
| Grounding and Electric Require- | |
|
| ments, page 6. | |
|
|
| |
| Sprayer electric cord is damaged. | Check for broken insulation or wires. | |
|
| Replace electric cord if damaged. | |
|
|
| |
| Motor or control is damaged. | Take sprayer to Graco/MAGNUM | |
|
| authorized service center. | |
|
|
|
312667B | 11 |
