HandyTone-386 User Manual Grandstream Networks, Inc.
10
5 Basic Operations 5.1 Get Familiar with Voice Prompt
HandyTone-386 has a stored voice prompt menu for quick browsing and simple configuration.
Currently, the voice prompt menu and the LED button is designed for FXS port 1 ONLY.
To enter this voice prompt menu, simply press the button or “***” from the analog phone.
Menu Voice Prompt User’s Options
Main Menu “Enter a Menu Option” Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter 01 – 06, 47, 86 or 99 Menu option
01 “DHCP Mode”,
“Static IP Mode” Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need
configure the all IP address information
through menu 02 to 05. If user selects
“Dynamic IP Mode”, the device will retrieve
all IP address information from DHCP server
automatically when user reboots the device.
02 “IP Address “ + IP address The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP
Mode.
03 “Subnet “ + IP address Same as menu 02
04 “Gateway “ + IP address Same as menu 02
05 “DNS Server “ + IP address Same as menu 02
06 “TFTP Server “ + IP address Same as menu 02
47 “Direct IP Calling” When entered, user will be prompted a dial
tone, dial a 12-digit IP address to make a direct
IP call.
(For details, see “4.2.2 Make a Direct IP
Call”.)
86 “Voice Messages Pending”
“No Voice Messages” If there are voice messages, user can dial “9”
and dial pre-configured phone number to
retrieve voice message.
99 “RESET” Enter “9” to reboot the device; or
Enter MAC address to restore factory default
setting (For details, see section 8.)
“Invalid Entry” Automatically return to Main Menu