HandyTone-386 User ManualGrandstream Networks, Inc.

Grandstream Device Configuration

STATUS BASIC ADVANCED FXS FXS

SETTINGS SETTINGS PORT1 PORT2

MAC Address: 00.0B.82.00.00.00

 

IP Address:

192.168.1.109

 

 

 

 

 

 

 

 

 

 

Product Model:

HT386

 

 

 

 

 

 

 

 

 

 

Software Version:

----Program 1.0.3.44 Bootloader 1.0.8.11

 

 

 

 

 

 

 

 

 

System Up Time:

0 day(s) 0 hour(s) 2 minute(s)

 

 

 

 

 

 

 

 

 

 

Registered:

Yes

 

 

 

 

 

 

 

 

 

 

PPPoE Link Up:

disabled

 

 

 

 

 

 

 

 

 

 

NAT:

detected NAT type is full cone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All Rights Reserved Grandstream Networks, Inc. 2005

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAC Address

 

 

The device ID, in HEX format.

This is very important ID for ISP

 

 

 

 

 

troubleshooting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

 

 

This field shows IP address of the HT386.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Model

 

 

This field contains the product model info, such as HT386.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Software Version

 

 

Program: This is the main software release. This number is always

 

 

 

 

 

used for firmware upgrade. Current release is 1.0.3.44

 

 

 

 

 

Bootloader: current version is 1.0.8.11.

 

 

 

 

 

HTML: current version 1.0.3.44.

 

 

 

 

 

 

VOC: current version is 1.0.0.10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System Uptime

 

 

This shows system up time since last reboot.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Registered

 

 

Whether the unit is registered to service provider’s server.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PPPoE Link Up

 

 

This shows whether the PPPoE is up if connected to DSL modem

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NAT

 

 

This shows what kind NAT the HT386 is connected to. It is based on

 

 

 

 

 

STUN protocol. If the detected NAT is symmetric NAT, STUN will not

 

 

 

 

 

work and Outbound Proxy needed to make HT386 functioning

 

 

 

 

 

correctly.

 

 

 

 

 

 

 

 

 

Basic Settings Page:

19

Page 19
Image 19
Grandstream Networks 386 user manual Nat