HandyTone-386 User Manual Grandstream Networks, Inc.
22
Daylight Savings Time This parameter controls whether the displayed time will be daylight savings
time or not. If set to “Yes” and the Optional Rule is empty, then the
displayed time will be 1 hour ahead of normal time.
The “Automatic Daylight Saving Time Rule” shall have the following
syntax:
start-time;end-time;saving
Both start-time and end-time have the same syntax:
month,day,weekday,hour,minute
month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
day: [+|-]1,2,3,..,31
weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight
saving rule is not based on week days but based on the day of the month.
hour: hour (0-23),
minute: minute (0-59)
If “weekday” is 0, it means the date to start or end daylight saving is at
exactly the given date. In that case, the “day” value must not be negative. If
“weekday” is not zero and “day” is positive, then the daylight saving starts
on the first “day”th iteration of the weekday (1st Sunday, 3rd Tuesda y etc).
If “weekday” us not zero and “day” is negative, then t he daylight saving
starts on the last “day”th iteration of the weekday (last Sund ay, 3rd last
Tuesday etc).
The saving is in the unit of minutes. The saving time may also be preceded
by a negative (-) sign if subtraction is desired instead of addition.
The default value for “Automatic Daylight Saving Time Rule” shall be set to
“04,01,7,02,00;10,-1,7,02,00;60” which is the rule for US.
Examples
US/Canada where daylight saving time is applicable:
04,01,7,02,00;10,-1,7,02,00;60
This means the daylight saving time starts from the first Sunday of April at
2AM and ends the last Sunday of October at 2AM. The saving is 60 minutes
(1hour).
PSTN Access Code Default is “*00”, user can change it. By pressing the code user can switch
the phone to PSTN line connected to the Line port of ATA and make PSTN
outgoing calls. This is called PSTN Pass Through.