Great Dane GDRZ48-17KAE Using Booster Battery, Replacing Fuse - Carbureted Engines, MIF TS204

SERVICE ELECTRICAL

Using Booster Battery

MIF TS204

c CAUTION: Avoid injury! The battery produces a flammable and explosive gas. The battery may explode:

•Do not attempt to jump start a frozen battery. Warm to 16 degrees C (60 degrees F).

•Do not smoke near battery.

•Wear eye protection and gloves.

•Keep sparks and flames away.

•Do not connect the negative (-) booster cable to the negative (-) terminal of the discharged battery. Connect at a good ground location away from the discharged battery.

•Do not cross jump the battery, damage to electronic modules will result.

3.Connect negative booster cable to booster battery negative post (E).

4.Connect the other end (F) of negative booster cable to a unpainted metal part of the disabled machine’s engine, away from battery.

5.Start the engine of the disabled machine and run machine for several minutes.

6.Carefully disconnect the booster cables in the exact reverse order: negative cable first and then the positive cable.

Replacing Fuse - Carbureted Engines

IMPORTANT: Avoid damage! When replacing fuses - use only a 20-amp fuse or you may damage the circuit.

One 20-amp fuse is located behind the seat area.

A

F

E

D

C

MX15336

1.Remove defective fuse (A) from socket.

2.Check metal clip in fuse window and discard fuse if clip is broken.

3.Install new fuse in socket.

Replacing Fuses - Fuel Injected Engines

BA

M71044

A- Booster Battery

B- Disabled Vehicle Battery

1.Connect positive booster cable to booster battery (A) positive post (C).

2.Connect the other end of positive booster cable to the disabled vehicle battery (B) positive post (D).

IMPORTANT: Avoid damage! When replacing fuses - use only fuses of the same rating or you may damage the circuit.

Service Electrical - 52