Great Dane GDRZ48-19KAE, GDRZ72-27KHE, GDRZ61-25KAE Engaging Mower, Stopping the Engine, Operating

OPERATING

Engaging Mower Stopping the Engine

c CAUTION: Avoid injury! Clear mowing area of all bystanders when operating this machine. Thrown objects could cause serious injury or death.

Keep hands and feet away from blades and discharge opening.

Do not mow in reverse unless absolutely necessary.

IMPORTANT: Avoid damage! To help prevent damage to the PTO clutch:

•Do not engage PTO with throttle in the fast position.

1.Adjust mower deck to desired cutting height.

2.Start engine.

A

MX15284

3.Move throttle lever to the 1/2- to 3/4-throttle position.

4.Unlock the park brake.

5.Move both motion control levers to the neutral position.

NOTE: In cold weather or with a new machine, it may be necessary to engage the choke at the same time as the PTO knob to prevent the engine from stalling.

6.Pull PTO knob (A) up to engage mower deck.

7.Move throttle lever to full-throttle position.

NOTE: The travel speed and turn rate will vary with the amount that the control levers are moved.

8.Push motion control levers forward slowly. Mow at a safe travel speed.

IMPORTANT: Avoid damage! To help prevent engine backfiring, throttle lever should be set at the 1/4- throttle position and run for 30 seconds prior to stopping the engine.

Do not stop engine when mower is on a slope of more than 30° for an extended period of time. Oil may run through valve train into carburetor and muffler.

1.Move the motion control levers to the neutral detent position (standard levers) or neutral lock position (optional “over the lap” levers).

2.Lock the park brake.

3.Push PTO switch down to disengage.

4.Move throttle lever to 1/4-throttle position and run for 30 seconds, then move throttle to slow position.

A

STOP

MIF

5. Turn key switch to STOP position (A).

c CAUTION: Avoid injury! Children or bystanders may attempt to move or operate an unattended machine.

Always lock the park brake and remove the key before leaving the machine unattended.

6. Remove key.

Operating - 19