Attaching Top Cover
Components and Hardware Needed: | Qty |
Drum Sander | 1 |
Top Cover | 1 |
To attach the top cover to the drum sander:
1.Remove the four button head cap screws and washers shown in the rear view of Figure 6.
2.Remove the two button head cap screws and washers shown in the front view of Figure 6.
Rear View
Front View
Figure 6. Top cover cap screws.
3.Place the top cover on the sander and attach the hinges with the screws and washers removed in Step 1.
4.Secure the front of the top cover with the two button head cap screws and washers removed in Step 2.
Mounting Control
Panel
Components and Hardware Needed: | Qty |
Control Panel | 1 |
To mount the control panel: |
|
1.Remove the bolts, lock washers, and flat washers shown in Figure 7.
