Recommended

Adjustments

For your convenience, the adjustments listed below have been performed at the factory and no further setup is required to operate your machine.

However, because of the many variables involved with shipping, some of these adjustments may need to be repeated to ensure optimum results. Keep this in mind as you start to use your new drum sander.

Step-by-step instructions for these adjust- ments can be found in SECTION 7: SERVICE ADJUSTMENTS.

1.V-Belt Tensioning (Page 27). Perform after the first 16 hours.

2.Feed Belt Tensioning & Tracking (Pages 31 & 32).

3.Table Adjustments (Page 34).

-18-

G0458 18" Open End Belt/Drum Sander

Page 20
Image 20
Grizzly G0458 instruction manual Recommended Adjustments