Site Considerations
Floor Load
The weight and footprint size for your machine is located in the machine data sheet. Some residen- tial floors may require additional reinforcement to support the machine, workpieces, and operator.
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figure 3 for the minimum working clearances.
24"
35" 
Figure 3. Model G0458 Working clearances.
Unsupervised children and visitors inside your shop could cause serious per- sonal injury to themselves. Lock all entrances to the shop when you are away and DO NOT allow unsupervised children or visitors in your shop at any time!
Stand |
|
Components and Hardware Needed: | Qty |
Carriage Bolts | 16 |
Serrated Flange Nuts 12mm | 16 |
Top Short Brackets | 2 |
Bottom Short Brackets | 2 |
Stand Legs | 4 |
Top Long Brackets | 2 |
Bottom Long Brackets | 2 |
We recommend assembling the stand upside down. To make it easier, have an assistant hold the pieces while you assemble the stand.
NOTICE Do not final tighten stand bolts until the stand components have been assembled.
To assemble the stand:
1.Mount a top and bottom long bracket to a stand leg and loosely secure with two M8- 1.25 x 15 carriage bolts and serrated flange nuts as shown in Figure 4.
Leg
Bottom Long Bracket
Top long bracket
Figure 4. Top and bottom long brackets secured
to a stand leg.
G0458 18" Open End Belt/Drum Sander |
