Grizzly G0526 instruction manual Clean Up Site Considerations, Working Clearances

Clean Up Site Considerations

The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or citrus-based degreaser such as GrizzlyÕs G7895 Degreaser. To clean thoroughly, some parts may need to be removed. For opti- mum performance from your machine, make sure you clean all moving parts or sliding contact surfaces that are coated. Avoid chlo- rine-based solvents as they may damage painted surfaces should they come in contact.

To access the sliding surfaces, remove the fence lock nut (Figure 11) and handle, and remove the fence from the jointer unit.

Fence Lock Nut

Figure 11. Removing the fence lock nut so the

sliding surfaces can be cleaned.

Once the sliding surfaces are clean, reassemble the fence to the jointer with the lock handle on the top and the fence lock nut below the fence sup- port assembly.

Gasoline and petroleum products have low flash points and could explode if used to clean machin- ery. DO NOT use gaso- line or petroleum prod- ucts to clean the machin- ery.

Floor Load

The Model G0526 weighs 247 lbs and has a base footprint of 20" x 60". Most commercial floors are suitable for the machine. Some residential floors may require additional reinforcement to support both the machine and operator.

Working Clearances

Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for the machine. See Figure 12 for the overall dimensions of the Model G0526.

60"

20"

Figure 12. Overall machine dimensions.

Unsupervised children and visitors inside your shop could receive seri- ous personal injury. Ensure child and visitor safety by keeping all entrances to the shop locked at all times. DO NOT allow unsupervised children or visitors in the shop at any time.

G0526 6" Jointer -15-