Beginning Assembly

 

Jointer To Stand

 

 

 

 

 

 

This section covers the basic assembly and adjustment instructions needed to begin opera- tion. Complete the assembly in the order provid- ed in this manual and then read the remaining portion of the manual before attempting any type of operation.

Your safety is important! Please follow the warnings below during this entire section:

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

!Disconnect power to the machine during the

entire assembly process. Failure to do this may result in seri- ous personal injury.

Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.

Components and Hardware Needed: Qty

Jointer

1

Jointer Stand

1

Hex Bolts 3Ú8"-16 x 3Ú4"

3

Lock Washers 3Ú8"

3

Tools Needed:

 

14mm Wrench or Socket

1

The jointer assembly is a heavy part. Seek assis- tance when lifting it onto the jointer stand.

To mount the jointer to the stand:

1.With the help of an assistant, lift the jointer onto the stand.

2.Align the three bolt holes on the jointer with the three holes on the stand (Figure 13).

Mounting Holes

Figure 13. Mounting holes.

3.Using a 14mm wrench, secure the jointer to the stand with the hex bolts and lock washers.

-16-

G0526 6" Jointer

Page 18
Image 18
Grizzly G0526 instruction manual Beginning Assembly Jointer To Stand, Tools Needed