Inventory
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we
H
G
F
E
A
B
C
D
Wood Crate: (Figure 3) | Qty | |
A. | Jointer Assembly | 1 |
B. | Cutterhead Guard | 1 |
C. | Handwheels | 2 |
D. | Handles | 2 |
E. | Fence Tilt Lever | 1 |
F. | Push Blocks | 2 |
G.Knife Setting Gauge Hardware Bag
| 1 | ||
| 2 | ||
| 2 | ||
H. | Tool Hardware Bag |
|
|
| 1 Each | ||
| 1 | ||
Cardboard Box: (Figure 4) |
| Qty | |
I. | Stand Assembly w/Motor and Door | 1 | |
J. | Pedestal Switch | 1 | |
K. | Wheel Assembly | 1 | |
L. | 1 | ||
M. | Dust Port | 1 | |
Assembly Fasteners |
| Qty | |
• | Hex Bolt | 1 | |
• | Flat Washer 8mm (Wheel/Stand) | 1 | |
• | Hex Bolts | 2 | |
• | Flat Washers 10mm (Wheel/Stand) | 2 | |
• | Hex Nuts | 2 | |
•Cap Screws
• Flat Washers 8mm (Jointer/Stand) | 6 | |
• Lock Washers 8mm (Jointer/Stand) | 3 | |
• Hex Nuts | 3 | |
• | Flat Washers 6mm (Handwheels) | 2 |
• | Cap Screws | 2 |
•Set Screw
• Cap Screws | 2 | |
• | Lock Washers (Pedestal) | 2 |
• | Flat Washers (Pedestal) | 2 |
• | Phillips Head Screws |
|
| 4 | |
• Flat Washers 5mm (Dust Port) | 4 | |
G0656 8" Jointer with |
| |
Figure 3. Box 1 inventory contents.
I
M | J |
LK
Figure 4. Box 2 inventory contents.
•Cap Screws M8-1.25 x 25 (Fence Suppt.). 4
•Flat Wshers 8mm (Fence Support)............ 4
•Lock Washers 8mm (Fence Supptort) ....... 4
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.
SUFFOCATION HAZARD!
Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.
