Grizzly G1012 instruction manual Hardware Bags, Inside Bags Qty

Figure 3. Stand components.

Figure 4. Bandsaw components.

Hardware Bags

Inside Bags	Qty
Carriage Bolts 5⁄16" - 18 x 1⁄2"	24
Flat Washers 5⁄16"	40
Nuts 5⁄16" - 18	32
Hex Head Bolts 5⁄16" - 18 x 3⁄4"	4
Hex Head Bolts 5⁄16"-18 x 1"	4
Hex Head Bolts 1⁄2" - 12 x 11⁄2"	4
Hex Nuts 1⁄2" - 12	4
Flat Washers 1⁄2"	8
Cap Screws 1⁄4"-20 x 11⁄2"	4
Phillip Hd Screws 1⁄4" - 20 x 1⁄2"	2
Hex Nuts 1⁄4" - 20	2
Flat Washers 1⁄4"	4
Setscrews 1⁄4" x 1⁄4"	2
Hex Bolts 3⁄8"-16 x 3⁄4"	2
Hex Bolts 3⁄8"-16 x 11⁄4"	2
Hex Nuts 3⁄8"-16	5
Flat Washers 3⁄8"	4
Lock Nuts 3⁄8"	4
Hex Bolt 3⁄8"-16 x 3"	1
Hex Bolt 5⁄8"-11	2
Flat Washers 5⁄8"	2
Fence Rail Spacers	4
5 x 5 x 20mm Key	1
Lock Knob (Male)	1
Star Knobs (Female)	2
Strain Relief w/Plastic Nut 1⁄2"	1
5mm Hex Wrench	1
3mm Hex Wrench	1
Adjustment Bolts (w/Eye)	2
Guide Blocks	8
Thumbscrews 1⁄4"-20 x 1⁄2"	8
Roll Pin 3 x 10mm	1
Table Insert	1
Rubber Feet	4

In the event that any non-proprietary parts are missing (e.g. nuts or washers), we would be glad to replace them, or for the sake of expediency, replacements can be obtained at your local hard- ware store.

G1012 18" Bandsaw -9-