Switch

The switch is pre-mounted on the bandsaw unit. To lock-out the switch, you must unplug the safe- ty key from the top of the paddle as shown in Figure 12. Never subsitute unplugging the machine from the power source with removing the lock-out key from the switch.

Figure 12. Removing lock-out key from switch.

To connect the switch power to the motor, plug the male end into the female end as shown in

Figure 13.

Figure 13. Connecting switch to motor.

G1019 14'' Bandsaw

-13-

Page 15
Image 15
Grizzly instruction manual Switch, Connecting switch to motor G1019 14 Bandsaw