Dust Port | Fence |
The dust port mounts underneath the table on the lower wheel cover. To install the dust port:
1. Fit the dust port over the two holes on the lower wheel cover.
2.Use the two
Figure 20. Dust port in place.
To mount the fence to the bandsaw table:
1.Loosen the two mounting brackets secured to the square fence rail and swing the brackets so they are perpendicular to the fence rail.
2.Position the mounting brackets under the front of the bandsaw table and attach with the two socket head cap screws provided.
See Figure 21.
Figure 21. Fence rail bracket attachment.
G1019 14'' Bandsaw |
