Table
To mount the bandsaw table:
1.Remove the two table support mounting bolts from the bandsaw unit.
2.Line up the pin location on the mounting bracket with the pin on the bandsaw unit. Insert the two mounting bolts and securely tighten. See Figure 18.
Figure 18. Table mounting bracket.
3.Insert the 5⁄16"-18 x 3" table indexing bolt with lock nut in the threaded hole in the support bracket.
4.Slip the table past the blade through the table slot and set the table trunnions onto the support bracket. Make sure the bolts drop through the support bracket.
5.Secure the table to the support bracket by tightening the two star knobs. See Figure 19. Remember to position the table so that the miter slot is to the right of the blade as you face the front of the bandsaw.
Figure 19. Star knobs
6.Place the table insert in the table top and slide the tapered pin so it fits snug in the hole on the side of the table.
NOTICE
The tapered table pin must be in position when operating the bandsaw.
G1019 14'' Bandsaw |
