Grizzly G4791 owner manual Lathe

Lathe
Type	TEFC Capacitor Start Induction
Horsepower	1-1/2 HP
Voltage	220V
Prewired	220V
Phase	Single
Amps	7.5A
Speed	1720 RPM
Cycle	60 Hz
Number Of Speeds	1
Power Transfer	Gear/Belt
Bearings	Sealed
Main Specifications:
Lathe Info
Chuck Type	3-Jaw Scroll, 4-Jaw Independent
Chuck Size	6 in.
Faceplate Size	8 in.
Tailstock Taper	MT#3
Tailstock Travel	3 in.
Tailstock Offset	15/32 in.
Cross Slide Travel	9 in.
Carriage Travel	35 in.
Compound Travel	3 in.
No. Of Spindle Speeds	9
Spindle Speed Range	250, 315, 400, 500, 630, 800, 1000, 1250, 1600 RPM
No. Of Longitudinal Feeds	36
Feed Rate	0.0047 - 0.0095 in.
No. Of Inch Threads	20
Thread Range Inch	11 - 40 TPI
No. Of Metric Threads	14
Thread Range Metric	0.5 - 3.0 mm
No. Of Change Gears	14
Swing Over Bed	12 in.
Swing Over Saddle	6-7/8 in.
Dist. Between Centers	39 in.
Spindle Bore	1-1/2 in.
Lathe Spindle Taper	MT#5
Mill Info
Drill Press Taper	MT#3
Mill Drill Spindle Travel	5 in.
Mill Drill Swing	21 in.
Dist. Spindle To Work Table	14-1/4 in.
Dist. Spindle To Bed	16-1/2 in.
Dist. Spindle To Center Line	8-1/2 in.
Mill Head Vertical Travel	4-7/8 in.
Max Tool Bit Size	1/2 in.
Drilling Cap For Steel	5/8 in.
Drilling Cap For Cast Iron	5/8 in.
Table Size Length	16-7/8 in.
Table Size Width	7-7/8 in.
Table Size Thickness	1-1/4 in.
Draw Bar Diameter	12 mm
Draw Bar Length	13-3/4 in.
Draw Bar TPI	M12 X 1.75
No. Of Mill Drill Speeds	9
Mill Drill Speed Range	315, 400, 500, 630, 800, 1000, 1250, 1600, 2000 RPM

<),.&&'m(.AVg\Z8dbWdAVi]Z$B^aa "*"