Grundig GBP 6000 2D manual Sound, Hdmi connections, BD-Live and USB connections, 36­ English

INFORMATION------------------------------------------------------------------------------------------------------------------

Sound

	Check the connections and the “Digital Output” settings. Check the
	input mode on the amplifier/receiver if you have connected one.
No sound. Low volume.	Press »AUDIO« to select the audio signal.
	The sound effects (Re-master, V. Surround, etc.) will not work when the
Distorted sound.
Cannot hear the desired	bitstream signal is output from the HDMI OUT socket or the
	»COAXIAL« socket.
audio type.
	When “BD-Video Secondary Audio” is set to “Off”, Dolby Digital
	Plus, and Dolby TrueHD are output from the »COAXIAL« terminal as
	Dolby Digital or DTS Digital Surround bitstream.
	Try to reset the device. To do so, press "8", wait for 5 seconds and
	then press this button again.
Cannot switch dubbed lan-	There are discs for which audio cannot be changed because of how
	the disc was created.
guage or the audio format .	When connecting an amplifier/receiver using a coaxial cable or an
	HDMI cable, you cannot switch the audio if “Digital Output” is set to
	“Bitstream”. Set “Digital Output” to “PCM” or connect using audio
	cables.
HDMI connections

The 4:3 aspect ratio picture expands left and right. Screen size is wrong.

Change “TV Aspect ” type to “16:9 Wide”.

BD-Live and USB connections

Cannot connect network	Check if the disc is a legal copy.
	Confirm whether the network connection is ok.
	Check if the capacity of Storage is full. if it is full, please clear storage
After network connection,	in the BD-Live menu and reset the device.
cannot download file	Confirm whether the network connection is ok.
	Change USB device and then test it.
Succeed in downloading	Confirm the device is USB 2.0. if it is USB 1.1, playing may pause.
file, but playback pause.
Pause playing the file in the	Change USB device and then test it.
USB device

36­ ENGLISH