CONNECTION AND
Connecting an MP3 player or a USB memory stick
GBP 7000 3D |
Note:
7The device must be switched off while the USB connection is being made. If it is not switched off, data can be lost.
1Switch off the device by pressing »9«.
2 Connect the USB interface of the MP3 player
to the »
« socket on the device, using a standard USB cable;
or
insert the USB plug of the USB memory stick in
the »
« socket on the device.
Notes:
7To remove the MP3 player or the USB mem- ory stick, switch off the device and pull out the cable for the data medium.
7The USB socket on the device does not sup- port a connection for a USB extension cable and is not designed for directly connecting to a computer.
Connecting to the internet with ethernet cable
Splitter |
Modem Router |
Telephone socket |
BD Player |
1 Connect the Ethernet socket of the modem/ router to the »ETHERNET« socket of the de- vice using a standard network cable (Twisted pair, RJ45 plug).
– The data throughput level is 10/100 Mbit.
Connecting to the internet with wireless antenna
1 To activate the »WLAN ANTENNA«, unplug the network cable from the »ETHERNET« socket.
–The leds on the »WLAN ANTENNA« start blinking.
Note:
7The network configuration and connection method may vary depending on the equip- ment in use and the network environment. The player is equipped with an IEEE 802.11n wireless module, which also supports the 802.11b/g standards. For the best wireless performance, you should use IEEE 802.11n certified WLAN network (access point or wire- less router).
