Grundig GBP 7000 3D manual Audio settings, Existing settings in the Audio menu

SPECIAL SETTINGS------------------------------------------------------------------------------------------------------

Audio settings

1 Press »SETUP« on the remote control to open the main menu.

2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to con- firm.

3 Select »Audio« by using »A« or »S« and press »ENTER« to confirm.

– The audio menu opens.

Network

	BD-Live	Audio
	Display	PCM Down sampling	48 kHz
		Digital Output	PCM
Settings	Audio	Dynamic Range Control	Off
		Stereo Downmix	Auto

Language

Parental

System

4Select the required function by using »A« or »S« and press »ENTER« to activate.

5Select your required settings by using »A« or »S« and press »ENTER« to confirm.

6 Press »RETURN« or »A« to close the sub- menu;

or

press »SETUP« to return to the main menu.

Existing settings in the Audio menu

PCM Downsampling

Sets the player’s digital output PCM sampling rate.

Options: 48 kHz, 96 kHz, Off.

Incorrectly setting the digital audio output’s PCM sampling rate may result in unpredict- able audio playback.

Digital Output

Sets the player’s digital audio output sockets. Options:

–PCM: Mixed digital audio sent over HDMI in PCM (if supported by HDMI device) and SPDIF in two channel PCM format.

–Bitstream HD: Original bitstream from disc is passed over HDMI and SPDIF using highest quality possible. HDMI has higher quality capabilities with advanced audio codecs like TrueHD and DTS-HD. BD audio limited to soundtrack for main movie (i.e. no PiP au- dio, no effects audio).

–Bitstream Legacy: Original bitstream from disc is passed over HDMI and SPDIF using legacy audio formats. BD audio limited to soundtrack for main movie (i.e. no PiP au- dio, no effects audio).

–Bitstream Mixed: BD audio streams are mixed and encoded into a single bitstream. Primarily intended for customers with SPDIF 5.1CH receivers who want to enjoy mixed BD audio in surround sound.

Dynamic Range Control

Is only active when a Dolby Digital signal is detected.

Options:

–Off: you can enjoy the movie with the stand- ard Dynamic Range.

–On: when movie soundtracks are played at low volume or from smaller speakers, the sys- tem can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

–Auto: the system turns on the Dynamic range control for all BD movie soundtracks except Dolby TruHD. If you have selected a Dolby TruHD track on the BD disc, Auto tells the player to only turn on dynamic range control if information embedded in the Dolby TruHD sound track tells it to do so.

Stereo Downmix

Sets »AUDIO OUT L/R« output to Auto, Stereo (LoRo) or Surround Encoded (LtRt).

ENGLISH 29­