LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Pmax=0,093mW (λ=405nm) IEC 60825-1:2007

INFORMATION------------------------------------------------------------------------------------------------------------------

Licence conditions

Manufactured under license from Dolby Laboratories.

Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

Manufactured under license

under U.S. Patent Nos:

5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS,

the Symbol, & DTS and the Symbol together are registered trademarks and the & DTS Digital Sur- round and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.

This item incorporates copy- right protection technology that is protected by U.S. pat- ents and other intellectual property rights. Use of this

copyright protection technology must be author- ized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Re- verse engineering or disassembly is prohibited.

You can recognise a 3D Blu- ray disc by the logo on the label. The same copyright protection for Blu-ray Disc logo which is described

above is also effective for Blu-ray 3D Discs.

Help protect the environment by recycling used products.

General information on laser devices

This device is a

CLASS 2 LASER

PRODUCT. This means that the de- vice emits laser

radiation which is safe for momentary expo- sures, but can be hazardous for deliberate star- ing into the beam.

Caution:

7 Do not stare into beam.

7If operating devices or

methods other than those

specified here are em- ployed, it may lead to

dangerous exposure to emissions.

7This device emits laser radiation. Because of the danger of eye injuries, the unit may only be opened or serviced by trained personnel.

7If settings other than those stated here are used or other procedures are carried out, this may lead to dangerous exposure to radiation.

Cleaning the device

Pull out the power cord from the wall socket. Clean the device by using a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammo- nia or abrasives.

Environmental note

This product has been man- ufactured with high quality

parts and materials which can be reused and are suit- able for recycling.

Therefore, do not dispose the product with nor- mal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. This is indi- cated by this symbol on the product, in the user manual and on the packaging.

Please consult your local authorities to learn the nearest collection point.

Cleaning the disc

If the device is unable to

scan CDs perfectly, use

a standard, commer-

cially available cleaning CD to clean the laser optics.

Other cleaning methods

may damage the laser optics.

Use a lint-free cloth for cleaning the CD and al- ways wipe it from the inside out in a straight line. Do not use cleaning agents for conventional vinyl discs, nor any solvents or abrasive cleaners.

ENGLISH 33­

Page 33
Image 33
Grundig GBP 7000 3D manual Cleaning the device, Environmental note, Cleaning the disc, General information on laser devices