INITIAL SETUP-----------------------------------------------------------------------------------------------------------------------

Network settings by using wired connection

The device must be connected to a wired router with an ethernet cable.

Please see chapter "CONNECTION AND PREP- ARATION".

1Press »SETUP« to open the main menu.

2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to con- firm.

3 Select »Network« by using »A« or »S« and press »ENTER« to confirm.

 

Language

Network

 

 

Parental

 

 

Interface

Wired

 

 

 

System

Link Status

Link Down

 

MAC Adress

00:22:84:fb:c 6c:65

 

 

Settings

 

IP Mode

Manual

Network

IP Adress

0.0.0.0

 

 

Subnet Mask

0.0.0.0

 

BD-Live

Gateway

0.0.0.0

 

Primary DNS

0.0.0.0

 

 

 

Display

Secondary DNS

0.0.0.0

 

Signal Strength

Good

 

Audio

Network Name (SSID)

grinternet

 

 

 

4 Select »IP Mode« by using »A« or »S« and

press »ENTER« to confirm.

5 Choose the setting (»Dynamic« or »Manual«) by using »A« or »S« and press »ENTER« to confirm.

Notes:

7The IP Mode option provides two configura- tion modes for IP:

Dynamic – Enables DHCP, the addresses are automatically assigned by the router.

Manual – Requires user to config- ure network settings such as IP ad-

dress, subnet mask, gateway, etc. It is able to show subnet mask, gateway, primary DNS, secondary DNS when "IP Mode" is set as "Manual".

7If you choose the option "Dynamic", go to step 11.

If you choose the option "Manual", continue with step 6).

6 Select »IP address« by using »A« or »S« and press »ENTER«.

Enter the IP address by using the number but- tons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

7Select »Subnet Mask« by using »A« or »S« and press »ENTER«.

Enter the Subnet Mask by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

8 Select »Gateway« by using »A« or »S« and press »ENTER«.

Enter the Gateway address by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

Note:

7The primary and secondary DNS (Domain Name System) in the next setting are the network adresses of the server allocated by the provider.

9 Select »Primary DNS« by using »A« or »S« and press »ENTER«.

Enter the Primary DNS by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select button »Cancel« by using »S« and press »ENTER« to cancel the setting.

ENGLISH 15­

Page 15
Image 15
Grundig GBP 7000 3D manual Network settings by using wired connection, English 15­