INFORMATION------------------------------------------------------------------------------------------------------------------

TV screen and video

 

Make sure that the LED/LCD-TV is connected to the VIDEO OUT so-

The images from this player

cket or HDMI OUT socket on this device.

do not appear on the tele-

Make sure that the LED/LCD-TVs input setting (e.g., VIDEO 1) is correct.

vision.

The device is likely to enter screen saver status.

Picture is distorted.

Try to reset the device. To do so, press "8", wait for 5 seconds and

 

then press this button again.

Video is not output in high-

High definition video cannot be output through the VIDEO OUT.

definition.

Confirm that the HDMI Resolution in the Setup menu is set properly.

The 4:3 aspect ratio picture

Use the LED/LCD-TV to change the aspect. Refer to your LED/LCD-TVs

expands left and right.

operating instructions.

 

Insert a USB memory stick with a free space. Select BD-Live Storage

When it is playing BD-LIVE

from the BD-Live Menulist. Then restart the device.

Please check the internet is available or not. Some of the disc need the

disc, Video output is a

support of internet.

black screen.

Please check the connection cable to the router. If it is loose, please

 

 

insert again.

Internet

WLAN network is deactivated, switch on the WLAN network. Desired WLAN network not – SSID is suppressed on the router; display SSID on the router.

found.– Distance to router is too large; reduce distance to router.

 

– MAC adress of the device is not enabled on the router;

Connection to router not

enable MAC address on the router.

– Data transfer from the router is encrypted; Enter the network key

established.

(WEP orWPA) on the device.

 

 

If this does not help, check the entire router configuration.

Sound

 

Check the connections and the “Digital Output” settings. Check the

 

 

input mode on the amplifier/receiver if you have connected one.

 

No sound. Low volume.

Press »AUDIO« to select the audio signal.

 

The sound effects (Re-master, V. Surround, etc.) will not work when the

 

Distorted sound.

 

Cannot hear the desired

bitstream signal is output from the HDMI OUT socket or the

 

»COAXIAL« socket.

 

audio type.

 

When “BD-Video Secondary Audio” is set to “Off”, Dolby Digital

 

 

 

 

Plus, and Dolby TrueHD are output from the »COAXIAL« terminal as

 

 

Dolby Digital or DTS Digital Surround bitstream.

 

 

Try to reset the device. To do so, press "8", wait for 5 seconds and

 

 

then press this button again.

 

Cannot switch dubbed lan-

There are discs for which audio cannot be changed because of how

 

the disc was created.

 

guage or the audio format .

When connecting an amplifier/receiver using a coaxial cable or an

 

 

HDMI cable, you cannot switch the audio if “Digital Output” is set to

 

 

“Bitstream”. Set “Digital Output” to “PCM” or connect using audio

 

 

cables.

 

 

ENGLISH 37­

 

 

 

 

 

 

 

Page 37
Image 37
Grundig GBP 7000 3D manual TV screen and video, Internet, Sound, English 37­