Grundig UMS 5101 CDC FM87.50MHz, Stored Radio Z, Deleting stations, … with the manual search

SETTINGS ____________________________________________________________________________________

FM87.50MHz

SET

P 8

8

STORED

8

RADIO Z

8

… with the manual search

1Press »TUNER/BAND« to switch on the device.

– Display: The frequency band (» FM « or » MW«) and the frequency.

2Select the frequency band (FM or MW) by pressing the »TUNER/BAND« button.

3Press » 5a « or » s6« to tune to the required station. Hold down » 5a « or

» s6	« to start a search for the next radio station, or briefly press » 5a « or
» s6	« to change the frequency in small steps.

4Tune to the station you want and then briefly press »SET« on the remote control.

– Display: »SET« flashes.

5Select the preset position with »PROGRAM UP/DOWN« on the remote control.

– Display: e.g. » P 8« flashes.

6Press »SET« on the remote control to store the station.

–Display: »STORED«, then frequency band and frequency or the station name, along with the preset position, e.g. » 8 «.

7To store more stations, repeat steps 3 to 6.

Note:

If a station transmits RDS information, the stereo system will store its name.

–Display: e.g. » F M 9 5 . 7 0 «, followed by the station name.

Deleting stations

Stored stations are deleted if you

–re-start the automatic station search;

–assign new stations to individual preset positions.

16