Grundig UMS 5101 CDC manual Cd -- P, CD 1 P, CD 3 P, Checking the track memory

Note:

To save more tracks, repeat steps 3 to 5.

CD MODE ____________________________________________________________________________________

H PROGRAM

CD -- P --

H PROGRAM

CD 1 P --

H PROGRAM

CD 3 P --

H PROGRAM

CD 3 P 01

3

Playing back tracks in selected order – creating a track memory

You can create a track memory of up to 20 tracks for the current CD in any order you choose and then play them back in that sequence. The same track may be saved more than once.

Selecting and storing tracks and playing back the track memory

1Insert CDs in the CD compartments.

Note:

The stereo system must be in stop mode.

2Select the function by pressing » PROGRAM« on the remote control.

–Display: »PROGRAM« and » CD --P --«.

3Select the desired CD with » DISC 1/2/3« on the remote control.

–Display: e.g. »H«, »PROGRAM« and » CD 1 P --«.

4Select the desired track using »PROGRAM UP/DOWN« and, if required, »+10 UP« on the remote control.

– Display: e.g. » CD 3 « and » P --«.

5Press » SET« to confirm.

– Display: » CD 3« and » P 01« (for memory position 1); » 3 « appears in the music calendar.

6 To start playback of the track memory, press »CD ￿ II«.

– Playback begins with the first stored track.

Checking the track memory

1When the CD is in the ”STOP” position, the programmed tracks can be called up with »PROGRAM«.

– Display: the programmed tracks are displayed in succession.

ENGLISH

29