BE A SAFE OPERATOR
1.Read and understand the Owner’s Manual.
2.Disconnect all electrical power before servicing or opening control box, adjusting or lubricating the equipment.
3.All electrical
4.Ground all electrical equipment as well as bin itself.
5.Only knowledgeable and trained personnel should operate this equipment.
6.NEVER WORK WITH BELTS OR AUGERS WITH POWER “ON”...
automatic controls may start without warning! Stay clear of motors, belts and augers.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE.
THE DECAL SHOWN ON THIS PAGE MUST BE DISPLAYED AS SHOWN
REPLACEMENTS ARE AVAILABLE UPON REQUEST
Note:
1.The decal on this page is NOT actual size.
2.Keep all decals wiped clean at all times.
3.All decals must be replaced if they are destroyed, missing, painted over, or can no longer be read.
Contact:
WRITE TO: DMC
1600 12th street N.EDMC Part Number: 801L010 MASON CITY, IA, USA 50401
OR CALL:
6 |