Hague Quality Water Intl 63MAQ, 63BEQ warranty Setting And Using The Appliance Control

Setting And Using The Appliance Control

SERVICE SETTINGS

This section is recommended for qualified service personnel only. The appliance control must be set

correctly for proper performance.

FUNCTION: Used to enter SERVICE SETTINGS mode. All three OPERATING MODES can be selected and all operating parameters can be set for each OPERATING MODE when this button is activated.

Press and hold (approximately 3 seconds) until display changes to "Set language???". Use the NEXT button to step through parameters that can be set.

REGENERATE

FUNCTION: Multi-purpose. 1.) Used to put the appliance into an immediate regeneration. Press and hold (approximately 5 seconds) until display changes to "Going to 1". The appliance is now in regeneration and will return to "Gal. Remain" after com- pletion of all cycles. 2.) Used to "speed up" or toggle through all the regeneration cycles.

CUSTOMER SETTINGS/NEXT

This section is recommended for qualified service personnel only. Must be set correctly for proper performance. FUNCTION: Multi-purpose. 1.) Used to enter CUSTOMER SETTINGS mode. 2.) Used to "step" through parameters that can be set in CUSTOMER

Press and release to accomplish various functions.

Figure 2

cu5Tt s

s~rt~as

SELECT DIGIT

FUNCTION: Used to control cursor movement when in CUSTOMER

with CHANGE DIGIT button. Press and release the Select Digit button to move cursor one digit to the right of parameter that can be set. When cursor is at extreme right position, press again to reset cursor to extreme left position.

CHANGE DIGIT

FUNCTION: Used to change values of parameters that can be set. Used in conjunction with SELECT DIGIT button. Press and release the Select Digit button to move cursor one digit to the right of parameter that can be set. When cursor is at extreme right position, press again to reset cursor to extreme left position.

SCROLL BACK

FUNCTION: Used to toggle back to the previous parameter setting in the event of a mistake in programming. This feature eliminates the need to toggle through the entire program to correct an input error.

CONTROL PANEL DISPLAY:

LCD DISPLAY

FUNCTION: Shows status of control; NORMAL OPERATING mode, SERVICE SETTINGS mode or CUSTOMER SETTING mode. It is very important to know which mode the control is in for proper operation.

WATER FLOWING INDICATOR

FUNCTION: Shown in the LCD display, it indicates that water is flowing through the WaterMax. Flow rate is displayed in gallons per minute. This is useful for checking for proper plumbing and leaks.

8