Haier HL32ATB, HL26ATB External A/V Source Setup, DVD connection, How to connect, How to use

Installation

External Equipment Connections

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1.Select the input source with using the INPUT button on the remote control.

2.Operate the corresponding external equipment.

CVBS	CVBS-L/R	YPbPr -L/R			L/R	EARPHONE
S-VIDEO	S-Video -L/R	Y	Pb	Pr	Audio Out

Camcorder

Video Game Set

DVD connection

How to connect

1.Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the Y, Pb, Pr jacks on the TV and connect the DVD audio outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure.

2.If your DVD only has an S-VIDEO output jack, connect this to the S-VIDEO input on the TV. as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1.Turn on the DVD player, insert a DVD.

2.Use the INPUT button on the remote control to select YPbPr mode.

3.Press Play button on external equipment for program play.

4.Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

BS	CVB	L/R	YPbPr -L/R			L/R	EARPHONE
S-VIDEO		o -L/R	Y	Pb	Pr	Audio Out

Component ports on the TV

Y

Pb

Pr

Video output ports on DVD player

Y Y

Y Y

Pb	Pr
B-Y	R-Y
Cb	Cr
PB	PR

10 TV LCD-TFT