Haier HL32ATB, HL26ATB owner manual DTV connection, Hdmi/Dvi

Installation

External Equipment Connections

DTV connection

- This TV can receive Digital Over-the-Air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).

How to connect

Use the TV`s (Y, PB, PR) , VGA or HDMI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections.

How to use

1.Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2.Use INPUT on the remote control to select

YPbPr, VGA, or HDMI source.

Signal	YPbPr	HDMI/DVI
480i	Yes	Yes
480p	Yes	Yes
720p	Yes	Yes
1080i	Yes	Yes

RS-232	PC	HDMI	L/R	CVBS	CVBS-L/R	YPbPr -L/R
				S-VIDEO	S-Video -L/R	Y	Pb	Pr

Digital Set-top Box

HDMI connection

<When the source device(DVD player or Set Top Box) supports HDMI>

How To Connect

1.Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).

2.No separated audio connection is necessary.

How To Use

- If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. - If the source device does not support Auto HDMI, you need to set the output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p. - Select HDMI input source in input source option of Select Main source menu.

<When the source device(DVD player or Set Top Box) supports DVI>

How To Connect

1.Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).

2.A separated audio connection is necessary.

3.If the source device has an analog audio output connector, connect the source device audio output to DVI Audio In port located on the left side of HDMI port.

How To Use

- If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p. - If the source device does not support Auto DVI, you need to set the output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p. - Press the INPUT or HDMI button to select HDMI input source .

Owner s Manual 11