After access, the following display appears.

Confirming the State of Projector Settings (Information)

Click [Information].

You can confirm the current state of the projector on the computer. You cannot change the settings of the projector.

Operating the Projector on the Computer (Control)

Click [Control].

You can control the projector on the computer. The functions of each button provide the same functions the button of the identical name.

(In case of VPL-CX86)

Setting the Connecting Mode

Click [Air Shot].

You can switch the mode and set each mode. To switch the model, select the desired mode button and then click [Select].

To set each mode, select the desired mode button and then click [Setup] to display the Setup display of the mode.

Click the [Apply] button to reflect the projector.

20 Setting/Operating via Web