Symptom

Cause and Remedy

 

 

When the computer is

• The computer is logged on with other than administrator

connected to the projector, the

privileges (Windows XP/2000 only).

mouse moves more slowly.

c The mouse moves slowly when the computer is logged on

 

with other than administrator privileges.

 

• In the [Option Setting]-[Connection Setting] -[Advanced],

 

[Capture image with video acceralator "off"] is not checked.

 

c Check [Capture image with video acceralator "off"].

 

c Even when the computer, OS and wireless LAN device of

 

the recommended system are used, the mouse may move

 

slowly.

 

 

Messages on the Display

 

 

 

PC: Message displayed on the computer

 

 

 

PJ: Message displayed on the projector

 

 

 

 

Message

PC

PJ

Cause and Remedy

 

 

 

 

Now searching LAN

a

 

• The connectable LAN module within the PC is being

Module.

 

 

searched according to the priorities of the LAN modules

 

 

 

specified in the [Option Setting] window.

 

 

 

c If the message persists, check and set the LAN module

 

 

 

to be used for the Air Shot Version 2 in the [Option

 

 

 

Setting] window.

 

 

 

 

Waiting until the IP

a

 

• The Air Shot Version 2 is waiting for the IP address to

address is set.

 

 

be set for the LAN module.

 

 

 

c If this message persists, check the wireless and network

 

 

 

settings for the LAN module you use. If the

 

 

 

Auto(DHCP) is selected, it may take few minutes to set

 

 

 

the IP address.

 

 

 

 

No connectable Projector

a

 

• Wireless transmission conditions are extremely bad.

has been found.

 

 

c Place the projector close to the computer, or remove the

 

 

 

obstacles between the projector and computer.

 

 

 

• The projector with a different serial number from those

 

 

 

of the projector you want to connect is selected. (In the

 

 

 

Simple Mode)

 

 

 

c Check the serial number of the projector you want to

 

 

 

connect, and change the projector to be connected in

 

 

 

the [Simple Mode Setting] of the [Option Setting]

 

 

 

dialog box.

 

 

 

• The Wireless Network Setting of the projector is not

 

 

 

identical with those of the computer. (In the Manual

 

 

 

Mode).

 

 

 

c Check and re-set the Wireless Network Setting for both

 

 

 

the projector and computer.

 

 

 

 

Others 27