Message | PC | PJ | Cause and Remedy |
|
|
|
|
Unable to configure | a |
| • Simple Mode Setting cannot be done successfully. |
Simple Mode. |
|
| c Click the [Close] button to close the main window and |
|
|
| then open it and make the Simple Mode Setting. |
|
|
| c Remove and then insert the USB wireless LAN |
|
|
| module, and make Simple Mode Setting. |
|
|
| c Restart Windows, and then make Simple Mode Setting. |
|
|
| • The Windows IP Address Setting of the USB wireless |
|
|
| LAN module is not set to Auto(DHCP) (only when |
|
|
| Windows 98SE/Me in the Simple Mode is used). |
|
|
| c Set the Windows IP Address Setting of the USB |
|
|
| wireless LAN module into Auto(DHCP). |
|
|
|
|
A projector using the | a |
| • The projector to be connected in Simple Mode is not |
Simple Mode connection |
|
| registered. |
is not registered. |
|
| c Click [Option Setting], [Simple Mode Setting] and |
|
|
| [Add], and then input the serial number of the projector |
|
|
| that you want to connect to register it. |
|
|
|
|
Network communication | a |
| • The computer is unable to perform proper network |
error. |
|
| communications. |
|
|
| c Restart Windows and start Air Shot Version 2. |
|
|
| c Check the setting of the USB wireless LAN module |
|
|
| used in the Air Shot Version 2. |
|
|
|
|
Projector communication | a |
| • Wireless transmission conditions are extremely bad. |
error. |
|
| c Place the projector close to the computer, or remove the |
|
|
| obstacles between the projector and computer. |
|
|
|
|
Projector communication | a |
| • The password specified with the projector is not |
password error. |
|
| identical with those specified with the computer. |
|
|
| c Set the same password to the computer as the projector |
|
|
| in the [Profile Setting] of the [Option Setting] dialog |
|
|
| box. |
|
|
|
|
The Projector is busy. | a |
| • The projector you are trying to communicate is |
|
|
| performing turning on/off operations. |
|
|
| c After the projector operations are complete, |
|
|
| communicate it and turn it off again. |
|
|
| • The [Setting] window of the projector is open. |
|
|
| c Close the [Setting] window and then communicate it |
|
|
| and turn it off again. |
|
|
|
|
Selected PC is busy. | a |
| • The computer you are trying to communicate is |
|
|
| performing turning on/off operations. |
|
|
| c After the computer operations are complete, |
|
|
| communicate it and turn it off again. |
|
|
| • The [Option Setting] window is open. |
|
|
| c Close the [Option Setting] window and then |
|
|
| communicate it and turn it off again. |
|
|
|
|
Request for connection/ | a |
| • The [Option Setting] |
disconnection rejected. |
|
| Connection/Disconnection request is received] is set to |
|
|
| [Always No]. |
|
|
| c Set it either to [Display Confirm Dialog] or [Always |
|
|
| Yes]. |
|
|
|
|
28 Others