Others
Troubleshooting
| Symptom | Cause and Remedy | |
The computer is not displayed | • Projector Station for Air Shot Version 2 is not installed in the | |
in the PC list. (Projector) | computer nor started. | |
| c Install it. | |
| c Start Projector Station for Air Shot Version 2. | |
| • The supplied wireless LAN card is not inserted into the slot | |
| of the projector or a card other than the supplied one is | |
| inserted. | |
| c Insert the supplied wireless LAN card. | |
| • The signal is extremely poor (the computer is distant from | |
| the projector or there is an obstacle such as a concrete wall or | |
| a steel partition/door between the computer and projector). | |
| c Place the computer and projector near to each other or | |
| ensure there is no such intervening obstacle. | |
| • When the computer is connected to the projector using the | |
| USB wireless LAN module, the USB wireless LAN module | |
| is disconnected. | |
| c Restart Windows and Projector Station for Air Shot Version | |
| 2 and connect the USB wireless LAN module. | |
|
|
|
| Note |
|
| Before disconnecting the USB wireless LAN module, disconnect the | |
| computer and projector. | |
• Simple Mode of the projector or computer (Projector Station for Air Shot Version 2) is not set to [On].
cSet Simple Mode to [On].
•[Connected Projector] of the computer is not set to the projector you want to connect.
cAdd or select the projector to be connected by using [Change Projector] of the computer.
In Manual Mode•The wireless and network settings of the projector or computer are not set correctly.
cCheck that the Network settings are the same as those of the connected equipment.
Others 25