Setting and connecting the computer
1 Start the Projector Station for Air Shot Version 2.
When it starts, the [ 
] icon appears in the task tray.
When [Create Shortcut Icon into Startup Folder.] is selected at installation, the Projector Station for Air Shot Version 2 starts automatically.
2 Make sure that the switch is set to WIRELESS LAN and then connect the USB wireless LAN module to the USB terminal of the computer.
The wireless setting is automatically done. When [Connect Projector automatically when starting application]
is selected in the [
Option Setting] dialog box (page 17), the connectable projector is searched and the image of the computer is projected on the searched projector.
3 When [Connect Projector automatically when starting application] is not selected, click the projector button to connect it.
Disconnecting the projector and computer
Click the projector button to disconnect the project from the computer.
To remove the USB wireless LAN module, use [Safe to remove hardware] to stop the device and then remove it.
When the projector you want to connect cannot be found
Change the projector or add the projector to be used. The changed or added projector appears in the select list.
Setting
1 Click the [ 
] icon in the task tray and select [Open].
The main window of Projector Station for Air Shot Version 2 opens.
Projector button
Note
It may take time to project an image due to the computer.
2 Click the [
] button of the main window to open the [Option Setting] dialog box.
The [Option Setting] dialog box is opened when the computer is not connected to the projector.
For details of the [Option Setting] dialog box, see page 17.
3 Click the [Simple Mode Setting] tab.
The dialog box with a projector name and serial number is displayed.
8 Wireless Connection