Installing from the CD-ROM

1 Insert the supplied CD-ROM into the CD-ROM drive of the computer.

The application installation window appears.

Follow the step 3 and following steps in “Installing from the USB” on page 4.

Note

If the installation window does not appear automatically, click [My Computer]-[CD- ROM] - [Dp_Inst].

Preparing the Projector

Insert the supplied wireless LAN card into the slot of the projector.

Note

Before inserting or removing the card, disconnect the power cord of the projector.

Inserting the card

Insert the card facing the right side towards the front panel of the projector until it clicks.

2

3

Press the eject button again.

The card pops out.

Remove the card.

Note

After the card is removed, press the eject button. If the button remains popped out, it may cause breakage of the button.

Notes

•Never use a wireless LAN card other than the supplied one.

•When the projector is carried, remove the card from the slot.

Removing the card

1 Press the eject button at the upper side of the slot.

The eject button pops out.

6 Preparation