Wireless Connection
Connecting in the Simple
Mode
When the Simple Mode is selected in automatic setup during installation, make the following settings to connect the computer and projector:
| 1000000 | 201 Meeting Room | 43.2.60.123 | Simple Mode | ||
|
|
|
|
|
|
|
Serial number | Mode |
Computer
Model name
IP address
USB wireless LAN module (supplied)
Projector
Wireless LAN card (supplied)
Setting the projector
1 Insert the supplied wireless LAN card into the slot of the projector.
2 Turn on the projector.
3 Press the AIR SHOT key on the remote commander.
The home display of Air Shot Version 2 appears.
Check that [Simple Mode] is selected.
Nick name (only
Operations when specified) guide
Icon
Icons representing wireless status: being not connected 
infrastructure mode 
/ 
/ 
/ 
status when no wireless card is
inserted 
If Simple Mode is not set to [On]
See steps 4 and 5 of “Connecting in the Manual Mode” on page 11 and select Simple Mode.
To change the network channel for Simple Mode
When the communication is poor, change the network channel.
The default setting is [11]. See steps 4 and 5 of “Connecting in the Manual Mode” on page 11 and set [Network Channel] to another channel. The channel is selected from among 1 to 11.
Notes
•If the USB wireless LAN module is connected to the computer, remove it before setting.
•You may not be able to use some channels according to the country/region.
•Follow the regulations of the country/region where you use the unit.
Wireless Connection | 7 |
|
|