Message | PC | PJ | Cause and Remedy |
|
|
|
|
Projector connection | a |
| • The computer cannot communicate with the projector as |
established already. |
|
| the other computer has already established |
|
|
| communications with the projector. |
|
|
| c After the projector is disconnected from the computer, |
|
|
| communicate with the projector again. |
|
|
|
|
Selected PC exceeds | a |
| • You tried to connect more than 5 projectors to one |
maximum number of |
|
| computer. |
connection. |
|
| c Reduce the number of the connected projectors to 4 or |
|
|
| less and then connect it again. (The maximum of 5 |
|
|
| projectors can be connected to one projector.) |
|
|
|
|
Projector is | a |
| • The projector you are trying to communicate is in the |
|
|
| standby mode. |
|
|
| c Turn on the projector and then try communicating it. |
|
|
|
|
No response from | a |
| • The Air Shot Version 2 communications are blocked |
projector. |
|
| because of the Firewall. |
|
|
| c Change the Firewall settings so that the Air Shot |
|
|
| Version 2 communications are not blocked. |
|
|
| • Wireless transmission conditions are extremely bad. |
|
|
| c Place the projector close to the computer, or remove the |
|
|
| obstacles between the projector and computer. |
|
|
| • The power cord of the projector is removed. |
|
|
| • The wireless card is removed from the projector. |
|
|
| c Check the projector status. |
|
|
| • While connecting to the projector by using the USB |
|
|
| wireless LAN module, the USB wireless LAN module |
|
|
| is removed. |
|
|
| c Restart Windows and start the Air Shot Version 2, and |
|
|
| then connect the USB wireless LAN module. |
|
|
|
|
Unable to switch | a |
| • When the screen resolution of the computer is not |
resolution of PC desktop. |
|
| identical with the projector LCD panel resolution, and |
|
|
| when the computer is connected to the projector with |
|
|
| [Set PC desktop to Projector resolution] of the [Option |
|
|
| |
|
|
| switching of the computer cannot be done successfully. |
|
|
| c If the message appears every time the computer is |
|
|
| connected to the projector, uncheck [Set PC desktop to |
|
|
| Projector resolution]. |
|
|
|
|
LAN Module with same | a |
| • The IP address on the same subnet mask which is used |
network address exists. |
|
| by the Air Shot Version 2 LAN module has been |
|
|
| assigned to another LAN module. |
|
|
| c Check the IP Address Setting of the LAN module used |
|
|
| with the Air Shot Version 2 and that used in the |
|
|
| computer. Then change the settings so that their |
|
|
| network addresses are not identical. |
|
|
|
|
USB Wireless LAN | a |
| • While the computer is connected to the projector, the |
Module disconnected |
|
| USB wireless LAN module is removed. |
while connecting. |
|
| c If the USB wireless LAN module is removed during |
|
|
| connection, the computer may become unable to |
|
|
| establish proper connection with the projector. To |
|
|
| remove the USB wireless LAN module, make sure to |
|
|
| disconnect the device. |
|
|
|
|
Others 29