Hamilton Beach SA-HB-40-DB-CERT manual Model

**Observe all state and local plumbing codes.

**This softener conforms to NSF/ANSI 44 for the specifically claimed performance.

**The efficiency of the softener is valid only at the stated salt dosage.

Manufactured By:

R&M Manufacturing CAUTION: Do NOT use with water that

28 South 1550 West is microbiologically unsafe or of unknown

Lindon UT 84042-1617quality without adequate disinfection

(801) 785-5557before or after the system.

pn: LBL-HB-40-CERT

MODEL:		SA-HB-40-DB-CERT Water Softener
Operating Temperature:		34o–120oF
Operating Pressure:	20–60 psi (#5 injector); 61-120 psi (#4 injector)
Voltage:		110V 60 cycles
Rated Service Flow:		15.2 GPM @ 15 psi
Rated Softening Capacity:		14.2 @ 3.0 (#5 injector)
(Kilograins / Pounds of Salt)		24 @ 7.5, 37.0 @ 15 (#4 injector)
Max Flow Rate to Drain:		4.0 GPM
Amount of High Capacity Resin:		1.25 ft3
Rated Efficiency:		4,720 grains @ 3.0 lbs

MODEL:	SA-HB-48-CERT Water Softener
Operating Temperature:			34o–120oF
Operating Pressure:		20–60 psi (#5 injector); 61-120 psi (#4 injector)
Voltage:			110V 60 cycles
Rated Service Flow:			18 GPM @ 35 psi inlet
Rated Softening Capacity:			15.1 @ 3.6 (#5 injector)
(Kilograins / Pounds of Salt)			26.0 @ 9.0, 39.7 @ 18 (#4 injector)
Max Flow Rate to Drain:			3.5 GPM
Amount of High Capacity Resin:			1.5 ft3
Rated Efficiency:			4,210 grains @ 3.6 lbs

**Observe all state and local plumbing codes.

**This softener conforms to NSF/ANSI 44 for the specifically claimed performance.

**The efficiency of the softener is valid only at the stated salt dosage.

Manufactured By: R&M Manufacturing

28 South 1550 West Lindon UT 84042-1617 (801) 785-5557

CAUTION: Do NOT use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

pn: LBL-HB-48-CERT

See pages 8 through 11 for:

•pre-installation checklist

•installation instructions

•start-up directions

2 Hamilton Beach Owner’s Manual