INSTALLATION
8)Take the embers and place on the burner in the space between the 2 front logs, ensure not to cover any burner ports. Do not put embers on the burner in the area between the front logs and the rear log. See photo below.
Separate platinum embers and place at the front of the burner in and around where the embers are placed. Avoid stacking platinum embers.
9)Place the center cross log on the locating pin in the top of the rear log and position as shown below.
Logs must be oriented as shown below.
A)
A)D)
B)
C)
10)Test fi re to ensure proper light off (make sure fl ame fl ows smoothly from one end of burner to the other). If there is any fl ame hesitation, check that area for any blockage of the burner ports.
11)
A)
D)
C)
B)
Hampton® | 33 |
